Burnus® Polishing & Repair Paste is perfect for removing minor scratches and dull spots on your acrylic glass. It is also suitable for polishing larger areas.
Properties:
- gentle to the material, as it is wax-free and contains no solvents that could damage the material
- economical in use
- no stress cracks or corrosion damage when used properly
Instructions for use
Apply the polishing paste (approx. 5 cm long strand - this is sufficient for a palm-sized area/spot) to the cleaned surface. Now polish the paste with a extra soft lint-free cloth under light pressure in circles for 3-5 minutes. Then rinse off the residue with warm water. The paste should produce a closed silky shimmering layer. If this is not the case, the amount of polishing paste is too small.
When using, follow the warnings on the bottle.
Withdrawal
- The return of the paste is only possible in a perfect condition.
- If an order is cancelled, the costs for the return shipment are to be borne by the buyer.
Further information on the return can be found in our General Terms and Conditions.
