The Polishing & Repair Paste and the special polishing cloth from Burnus ® are ideal for polishing plastic surfaces such as Plexiglas® / acrylic glass.
In combination you can remove light scratches and dull spots from your acrylic glass.
Advantages of the Polishing & Repair Paste:
- gentle to the material, because wax-free and without material-damaging solvents
- economical in use
- no stress cracks or corrosion damage when used properly
Advantages of the special polishing cloth:
- lint-free
- extra soft
- hard-wearing
- washable (up to 40°C)
Instructions for use
Apply the polishing paste (approx. 5 cm long strand - this is sufficient for a palm-sized area/spot) to the cleaned surface. Now polish the paste with a extra soft lint-free cloth under light pressure in circles for 3-5 minutes. Then rinse off the residue with warm water. The paste should produce a closed silky shimmering layer. If this is not the case, the amount of polishing paste is too small.
When using, observe the warnings on the bottle.
Note: Do not wipe the pane dry even with the special polishing cloth. This can lead to slight scratches in the long run, which will cause a transparent panel to become dull.
Withdrawal
- The return of the polishing & repair paste as well as the special polishing cloth is only possible in a perfect condition.
- If an order is cancelled, the costs for the return shipment are to be borne by the buyer.
Further information on the return can be found in our General Terms and Conditions.
